5 - Checkout Part 3 - Checkout Problem

thumb img 1649 1024 med




If you wish to follow the text of the “Checkout Problem” See the original manual. 


Otherwise this is pretty easy.


1) Place straws on the front of the machine as shown:



2) Install long straws on the back of the device as shown



3) With clock panel pulled to the right, set all flipflop value to zero. 



4) Slowly pull clock panel out all the way to the right, and slowly push it in as far as it will go. 

As you do this, the readout should show the following pattern on each push

   Initial state  - 000

 Clock count 1  - 001 

 Clock count 2  - 011

 Clock count 3  - 111

 Clock count 4  - 110

 Clock count 5  - 100

 Clock count 6  - 000

 With each successive clock the pattern continues







thanks for viewing!














© Some Old Guy 2017